Lọc theo danh mục
  • Năm xuất bản
    Xem thêm
  • Lĩnh vực
liên kết website
Lượt truy cập
 Lượt truy cập :  17,046,196
  • Công bố khoa học và công nghệ Việt Nam

Vật liệu xây dựng

Nikolay Muzichenko, Lưu Thị Hồng(1), Roman Kotelenko

Công nghệ nâng cao chất lượng tấm lợp amiăng xi măng bằng cách sử dụng phụ gia phức hợp từ nguồn thải công nghiệp thay thế xi măng

Technology to improve the quality of asbestos-cement roofing sheets by using complex additives from industrial waste sources to replace cement

Vật liệu và Xây dựng

2021

3

93-97

1859-381X

Bài báo trình bày kết quả nghiên cứu tấm amiăng xi măng được sản xuất với lượng xi măng được giảm 20 đến 50%  và được thay thế bằng phụ gia phức hợp với quy mô phòng thí nghiệm và tại cơ sở sản xuất. Kết quả các thông số vật lý và kỹ thuật của sản phẩm thử nghiệm được so sánh với sản phẩm thông thường hiện có được sản xuất tại Việt Nam và Nga. Mục đích của nghiên cứu là kiểm tra lý thuyết về khả năng thay thế xi măng trong tấm amiăng xi măng bằng phụ gia phức hợp mà không làm giảm chất lượng của sản phẩm. Trong điều kiện phòng thí nghiệm, các mẫu được sản xuất với tỷ lệ phụ gia phức hợp thay thế xi măng là 20% và 50% sau đó được kiểm định tại phòng thí nghiệm Viện Vật liệu xây dựng (VIBM).  Với kết quả thí nghiệm khả quan, sản phẩm được thử nghiệm công nghiệp tại nhà máy ở Việt Nam. Trong điều kiện sản xuất liên tục và không thay đổi các thông số kỹ thuật, phụ gia phức hợp được thay thế xi măng cho đến khi đạt tỷ lệ 20% và được lấy 5 mẫu tại 5 thời điểm khác nhau. Các chỉ tiêu cơ lý của tất cả mẫu tấm amiăng xi măng với hàm lượng phụ gia phức hợp khác nhau đều lớn hơn chỉ tiêu của tấm amiăng xi măng thông thường đối chứng. Cường độ mẫu có  phụ gia phức hợp thay thế lớn hơn so với cường độ của mẫu đối chứng là từ 8,5% đến 41,3% ở tuổi 8 ngày dưỡng hộ và từ 3,4% đến 31,4% ở tuổi 14 ngày dưỡng hộ. Khối lượng riêng của mẫu có hỗn hợp phụ gia cũng cao hơn so với mẫu đối chứng. Kết quả nghiên cứu cho thấy khả năng tiếp tục giảm lượng xi măng mà không làm giảm chất lượng sản phẩm, không tăng lượng sợi amiăng và giúp giảm đáng kể chi phí sản xuất.

The article presents the results of laboratory and industrial tests of asbestos-cement sheets produced with a reduced amount of cement by 20, 50%, which was replaced by complex mineral additives. The test results have been compared the physical and technical parameters of the resulting product with ordinary market products manufactured in both Vietnam and Russia. The aim of the research was to test the theory of the possibility of replacing cement in asbestos-cement sheets with complex mineral additives without losing the quality of the final products.In the laboratory conditions, several series of samples were produced with different ratiocomplex mineral additives to cement from 20% to 50%. All the samples were later tested at Vietnamese Institure for Building Materials (VIBM) laboratories. After obtaining positive laboratory results, industrial tests were carried out at one of the factories in Vietnam. In production conditions, without stopping the machine and without changing its parameters, 20% of the cement has been replaced with mineral powder in five consecutive mixtures. The physical and mechanical properties of all samples of asbestos-cement sheets with different amounts of complex mineral additives exceed those of the control asbestos-cement sheets. The exceeding strength of samples with a complex mineral additive relative to the strength of control samples was from 8.5% to 41.3% on curing eighth days and from 3.4% to 31.4% on curingfourteenth days. The true density of samples with a complex additive is also higher than that of control samples. The theory of replacing a part of the cement with complex mineral additives in the production of asbestos-cement sheets has been experimentally tested. In real production conditions, when 20% of cement is replaced by a complex additive, all physical and mechanical products of the manufactured products exceed the control samples. This opens up the possibility of further reducing the amount of cement without losing product quality and without increasing the amount of asbestos fiber. It shall bring a significant reduction in production costs will be achieved.

TTKHCNQG, CTv 171